Power Factor Correction Systems
Power Factor Correction Systems
Ready-to-connect, automatic power factor correction systems in a sheet steel housing for wall mounting or floor installation, suitable for networks without harmonic loads.
- Power range from 17.5 to 500 kvar per cabinet
- Completely ready-to-connect
- Self-adjusting, intelligent reactive power controller
- Power capacitors LKT with dry technology and 4-fold safety
Power Ranges
Power Factor Correction Systems in sheet steel wall-mounted housing:
- LSK ...-4: 17.5 to 60 kvar
- LSK ...-2: 68.75 to 100 kvar
- LSK ...-3: 112.5 to 200 kvar
Power Factor Correction Systems in sheet steel floor-standing housing:
- LSFC …-64: 100 to 500 kvar

Power Factor Correction Systems - detuned
Ready-to-connect, automatic power factor correction systems in a sheet steel housing for wall mounting or floor installation. Detuned for low-voltage networks with a high harmonic content.
- Power range from 17.5 to 500 kvar per cabinet
- Completely ready-to-connect
- Self-adjusting, intelligent reactive power controller
- Power capacitors LKT with dry technology and 4-fold safety
Recommended Application
Power Factor Correction Systems of the LSFC-P series are suitable for central compensation in networks with harmonic loads according to DIN EN 61000-2-4 Class 2.
Power Ranges
Power Factor Correction systems in sheet steel wall-mounted cabinets:
- LSK ...: 17.5 to 100 kvar
Power Factor Correction systems in sheet steel floor-standing cabinets:
- LSFC …: 75 to 500 kvar

Dynamic Power Factor Correction Systems, detuned – LSFC-E in sheet steel cabinets
The dynamic power factor correction systems LSFC-E by FRAKO enables wear-free and interference-free compensation by electronically switching capacitor stages at zero crossing.
With the dynamic reactive power controller PFC-12TR-1, the LSFC-E series is used in low-voltage networks:
- Where low short-circuit power causes disturbances when switching powerful consumers.
- Where immediate power factor correction with high switching frequency is required.
- Where compensation is needed only for a few network cycles at a time.
- Power range LSFC-E: 100 to 300 kvar

Also interesting

Appropriate Dimensioning of PFC Systems
More information